spiral wound gasket pipe jacket

spiral wound gasket 1.material:metal and non-metallic compound 2.excellent compression resilience ratio 3.shape:Ring Gasket

spiral wound gasket

Due to the special design, spiral wound gasket can be working in high temperature (graphite, 550oC), high pressure (320 bar). With its excellent recovery property, spiral ound gasket working well with fluctuations in temperature and pressure. Selected material components and variations in construction allow this gasket to adapt to the requirements of many media and operating conditions.

Properties and fiels of application

1. Good recovery rates

2. Excellent temperature resistance. Permanent temperature range -200oC to +550oC

3. Very high operating pressure limits (320 bar)

4. Good chemical resistance

5. High-grade, reinforced and blow out safe gasket as per UW (Healty and safety at Work Act), high

    operating safe

6. Very low leakage rate, meets TA-LUFT requirement

7. No ageing, no embitterment, even at high temperature

8. Asbestos-free, physiologically harmless, disposal with domestic waste

9. Good handling during transport, installation and removal. Mechanically stable, scratch-resistant

10. Have been used with success everywhere in chemical plants, power stations etc and especially 

      in application, where operating conditions are critical

Style	Construction	Flange	Hoop material	Filler		Inner & outer Material	Size(mm)	Thickness (mm)
				Material	Code			V	W
DN-15	Basic type	Tongue and Groove	304304L316316LTa  Mon400Inconel  etc.	AsbestosGraphitePTFEMicaCeramic	ASBFGPTFEMICACER	Carbon steel304316TaMon400Inconel	Φ 15-3000	3.24.5	4.85.57.5
DN-300	With inner ring	Male and Female
Dn-400	With outer ring	Raised face Flat face
DN-500	With inner, outer ring	Raised face Flat face
DN-600	For heat exchanger	Heat exchanger

  Product Picture:

spiral wound gasket pipe jacket